Escalator type hank yarn dryer

NDC Escalator Type Continuous Hank Yarn Dryer

Application

The machine is used for the drying wool, acrylic fibers and cotton yarn after wet processing. It is most suitable for drying hank yarns of woolen, cotton, synthetic and any other blended fibers. Wide range of conveyor velocity ratios and automatic temperature control system are equipped to process different fiber quality of the hank yarns. Good thermal efficiency, maximum drying capacity, safe and easy operation are your assurance, compared to traditional type drying machine, this mode is more saving energy and protecting environment.

Features

1. Body is built with insulated panels with heat-resistant fiber glass material inside to ensure heat insulation.

2. High efficiency heater completes with automatic temperature control system, guarantees hot air to penetrate through yarns and re-circulate within the enclosure.

3. Driving equipment for the conveyor completely enclosed but easily accessible for maintenance purposes.

4. Cooling fan installed at both ends to improve the working environment.

5. Hank- holding bar of light stainless steel for easy handing.

Main Technical Parameters

1. Form: Continuous escalator Drying.

2. The height of the entry and exit of the conveyer bar：960mm.

3. The availability length of the conveyer bar: 750-900mm.

4. The moving speed of the conveyer bar: 0.2~1.5m/min.

5. Steam working pressure: 3.5~4kg/cm².

6. The temperature of the chamber: 90℃~130℃，adjust automatically.

Specifications

Specifications are subject to change without further notice.